Fujitsu ETERNUS DX S5 Series Operation Manual (Basic page 62

4. Component Expansion/Function Enhancement
Installing Additional Drive Enclosures
Note
To add high-density drive enclosures, fasten the high-density drive enclosure cables (the mini SAS
HD cable between enclosures and the power cord) to the flap brackets and the cable management
arm on the rear of the device with the clamp belts.
Cable management arm
16
Click the [Next >>] button.
A screen that indicates the drive enclosure has been added appears.
17
Click the [Done] button.
The [Add Drive Enclosure] screen closes and the screen returns to the [Drive Enclosure] screen.
18
In the [Storage] screen of [Component], check that the added drive enclosure is displayed.
19
To install more additional drive enclosures, repeat
20
Install the drives.
For details on drive installation, refer to
Clamp belts
Flap bracket
Clamp belts
Step 1
"Additional Drive Installation Procedure" (page
62
to Step 18.
Operation Guide (Basic)
34).