Fujitsu ETERNUS DX S5 Series Operation Manual (Basic page 70

4. Component Expansion/Function Enhancement
Adding Servers
■
CA Port Group Creation
Create a CA port group for a host to access the ETERNUS DX.
A CA port group is a group of host interface ports that have the same interface and connect to the specific host
group.
The procedure to create a CA port group is as follows:
1
Click the [Connectivity] tab on the navigation of the ETERNUS Web GUI screen, and then click "Port Group"
in [Category].
The [CA Port Group] screen appears.
2
In [Action], click the [Create CA Port Group] that corresponds to the host interface of the port group that is
to be added.
The [Create CA Port Group] screen appears.
3
In the [Create CA Port Group] screen, enter the name of the CA port group that is to be created, select the
checkbox for the ports that are to be registered in the CA port group, and click the [Create] button.
A confirmation screen appears.
4
Click the [OK] button.
The CA port group is created and the setting completion screen appears.
5
Click the [Done] button.
The screen returns to the [CA Port Group] screen.
■
Host Group Addition
Add the information on the hosts (servers) that access the ETERNUS DX via the host interface port.
A host group is a group of HBAs that have the same host interface and access the same LUN groups.
Note
Make sure to perform the appropriate host response settings before performing host group registration.
If the appropriate host response settings are not set, the volumes may not be recognized or the expected
performance may not be achieved.
The procedure to register a host group is as follows:
1
Click the [Connectivity] tab on the navigation of the ETERNUS Web GUI screen.
2
In [Action], click the [Add Host Group] that corresponds to the host interface of the server that is to be
added.
The screen to add a host group appears.
3
Specify a host group name to be created, and select a host response to be assigned to the host group.
4
Register a host in a host group, and then click the [Add] button.
A confirmation screen appears.
70 Operation Guide (Basic)