Figure 12 Message Format Of The Lcd Panel (During Startup) - Fujitsu ETERNUS DX S5 Series Operation Manual (Basic

A. Component Names
Frontend Enclosures (ETERNUS DX900 S5)
LED name
MAINTENANCE
CACHE
READY
REMOTE
FUNCTION
●
LCD Panel
This is a liquid crystal display panel. Various information of the ETERNUS DX is displayed.
The information is classified as shown below:
Displaying the status of the ETERNUS DX
•
• Displaying warning messages when an error has occurred in the ETERNUS DX
Menu operation using the panel key
•
For details on the menu operations, refer to
The following types of warning messages are displayed on the LCD panel:
• Messages that are displayed during startup
Messages that are displayed while running (or operating)
•
The message format for each warning message is described below.
●
Messages That Are Displayed during Startup
The message format that is displayed on the LCD panel during startup is shown in
Figure 12
* b o o t *
P O S T
1
General status
2
Target component
3
Component state / component error message
LED status
(green)
(blinks green)
(green)
(green)
(green)
(green)
Message Format of the LCD Panel (during Startup)
1 2
- C M 0 0
- X X X X - - - - - - -
3
Meaning
Maintenance for the ETERNUS DX is in progress.
Maintenance (from ETERNUS Web GUI or ETERNUS CLI) for the
ETERNUS DX is in progress or a status check of the ETERNUS DX is
necessary.
There is data in the cache memory of the ETERNUS DX.
The ETERNUS DX is available for use.
The ETERNUS DX is turned on and off with the server.
Indicates that a menu operation from the system operation panel is
being performed.
"● Panel Keys" (page 89).
87
Figure 12.
Operation Guide (Basic)