HQLM-1720WR
10.4 Fixed rack mount with adapter RS-1770
10.5 Tilted fixed rack mount adapter RS-1770T, with a blank panel RS-1770T-BP
When installing this system, a space of EIA 8U size is required.
Use a dedicated blank panel, RS-1770T-BP.
When the system is tilted for 15°, the lower section of the system body (section with * mark) pops out for ap-
proximately 1.8 mm downward. Therefore, if the system is mounted at the lower section, and if the projecting
section interfere, mount the system at an angle of 7.5º or lower.
- 62 -