Update Of Firmware - Ikegami HQLM-1720WR Operation Manual

HQLM-1720WR

Update of firmware

Updating the firmware is possible by the USB
memory.
MAIN MPU
When updating the MAIN MPU firmware, put a
check mark here.
Specified file name 1720vxxx.bin
SUB MPU
When updating the SUB MPU firmware, put a
check mark here.
Specified file name 1720sxxx.bin
FILE NAME 1720 v xxx . bin
Model information
1720 : HQLM-1720WR
Identification information
v for MAIN MPU
s for SUB MPU
Version information
Exampl 1720v105.bin
Extension (bin)
FPGA1
When updating FPGA1, put a check mark here.
Specified file name 1720fxxx.f1b
FPGA2
When updating FPGA2, put a check mark here.
Specified file name 1720fxxx.f2b
When updating FPGA3, put a check mark here.
Specified file name 1720fxxx.f3b
FILE
Updating
The selected items with a check mark in items
through
Updating process requires approximately 0.5 to 20
minutes, depending on the USB performance and
the selected items.
Updating of only SUB MPU requires nine minutes.
If updating SUB MPU is not necessary, deselect-
ing can reduce the required time.
Confirm that the file names specified in items
Ver1.05
through
If a specified file for the selected item does not
exist, an error is displayed, and updating stops.
After upgrading, confirm that the version is
properly upgraded by checking the version num-
ber in "MENU - INFO."
- -
42
FPGA3
1720 f xxx . f1b
Model information (fixed to 1720f)
Version information
Example 1720f 105
Extension
FPGA1 f1b
FPGA2 f2b
FPGA3 f3b
are updated by EXECUTE.
exist in the root in the USB memory.
Ver1.05