Ikegami HQLM-1720WR Operation Manual page 15

TEST switch
Press this switch to display internal test signals.
The switching between the following seven types
of TESTS signals is done each time this switch is
pressed. In addition, the Color Bar signal is not
displayed when in the HDR mode and the color
space BT.2020 are selected.
+ 2%
0% 100%
0%
- 2%
100% Window
F1 switch
Press this switch to select an item preset in the
"MENU-FUNC.SW-FUNCTION-MODE".
For presettable items, refer to "4-9. Description
on MENU-FUNC. SW Functions"
F2 switch
Press this switch to select an item preset in the
"MENU-FUNC.SW-FUNCTION-MODE".
For presettable items, refer to "4-9. Description
on MENU-FUNC. SW Functions"
F3 switch
Press this switch to select an item preset in the
"MENU-FUNC.SW-FUNCTION-MODE".
For presettable items, refer to "4-9. Description
on MENU-FUNC. SW Functions"
- 6.8% - 6% - 4% - 2%
0%
100% 102% 104% 106% 108% 109%
100 109%
+ 2% + 2%
- 2% 100% - 2%
% Gary
- 5 -
F4 switch
Press this switch to select an item preset in the
"MENU-FUNC.SW-FUNCTION-MODE".
For presettable items, refer to "4-9. Description
on MENU-FUNC. SW Functions"
MONO switch
When turning the color signal into monochrome,
press this switch.
APT switch
When correcting APERTURE, press this switch.
The correcting amount of APERTURE is set
from "MENU - VIDEO - APERTURE - LEVEL".
SCREEN switch
Press this switch to display images in R, G or B
individually.
The switching between colors takes place as fol-
lows each time this switch is pressed.
"R only" "G only"
Screen"
MARKER switch
Press this switch to turn on/off markers.
* This function is disabled when an internal test
signal is displayed.
CHROMA manual control
This control serves as a manual/preset switch
for chroma or a manual data variable control.
The control pops out when it is pressed and the
mode is changed to MANUAL.
BRIGHT manual control
This control serves as a manual/preset switch
for brightness or a manual data variable control.
The control pops out when it is pressed and the
mode is changed to MANUAL.
CONT manual control
This control serves as a manual/preset switch
for contrast or a manual data variable control.
The control pops out when it is pressed and the
mode is changed to MANUAL.
This control can be an allocation to BACK-
LIGHT according to the
"MENU-UTILITY-CONT VR ASSIGN" setting.
HQLM-1720WR
"B only" "Normal