System Reset - D-Link DES-5200 User Manual

Fast Ethernet Switching System User's Guide
Specifies the default gateway. You can enter up to 15 characters. A LAN Default
Gateway must be assigned in order to update software through a TFTP server that
is not on the same subnet as the DES-5200.
Follow these steps to enter user changeable information:
Select the field you would like to edit.
1.
2.
3.

System Reset

The System Reset panel, displayed in Figure 24, enables you to reset the DES-
5200 without powering off.
Figure 24: System Reset
Some configurations require that the DES-5200 be reset in order for them to take
effect. Screen prompts instruct you to reset as needed.
Follow these steps to reset the DES-5200:
1.
2.
To exit without resetting:
1.
Managing the DES-5200
Delete the default information.
Enter the new information.
Select Save and press Enter. Follow screen prompts.
Select Yes.
Press Enter.
Select No.
48