Power Plug - D-Link DES-5200 User Manual

Fast Ethernet Switching System User's Guide
Full Size Modules
Table 2: DES-5200 Full Size Modules
Module Name
12 TX Module
8 FX Module
CPU Module
Back Plane*
* Note: Back Plane refers to the internal back plane of all models of the DES-
5200 series. It is not visible or accessible without opening the case. All
modifications and repairs to the back plane must be done by D-Link Systems, Inc.
or authorized repair facilities. Do not open the case. Opening the case can cause
injury and/or damage. If there is a problem with the modules or the back plane,
contact D-Link System, Inc. Technical Support for assistance.
Optional Modules
The optional modules are half size modules. The half size modules work in slots 3
and 4 of the chassis. The following optional modules are available:
Table 3: DES-5200 Optional Modules
Module
DES-5005T
DES-5005
DES-5008

Power Plug

The three pronged power plug is located at the front of the DES-5200. The switch
will work with AC in the range 100-240 VAC, 50-60 Hz. The power requirements
are indicated on the rear panel of the DES-5200.
Introduction
Part Number
0DES5200T.A2
0DES5200F.A2
0DES5200I.A2
1ES5200B..A1 (PCBA)
The DES-5005T is a 2-Port TX module.
The DES-5005 is a 2-Port FX module.
The DES-5008 is a 1-Port gigabit module.
Part Number
DES5005T..A1
DDES5005..A2
DDES5008..A2
Description
12-Port 10/100-TX module
8-Port 100BASE-FX
module
CPU Module
Back Plane
Description
2-Port 10/100-TX module
2-Port 100BASE-FX module
1-Port 1000BASE-SX gigabit module
5