Web Management - D-Link DES-5200 User Manual

Fast Ethernet Switching System User's Guide
The DES-5200 can be managed through an Internet connection. This type of
connection is called Web Management. The panels look different but they have
the same information and function as Console Based Management.
Using Web Management
You can use your web browser to configure and manage the DES-5200. The
DES-5200 must have an IP address in order to be managed over the web. Log in
through Local Console Management the first time and assign an IP address to the
DES-5200. All subsequent management sessions can be done over the web.
Follow these steps to configure the DES-5200 for web based management:
1.
2.
Commands
The following commands are used in Web based management.
Apply
Applies the changes that you have just made. Some settings require you to reset
the DES-5200 in order for changes to take effect.
Refresh
Refresh enables you to refresh the panel after you have made changes. Use refresh
to see the changes you have made.

Web Management

Enter the IP address of the DES-5200 in the address field of your
Web browser and press Enter.
Log in using your user name and password.
Web Management
6
96