Snmp Engine Id; Single Ip Management Settings - D-Link xStack DES-3800 Series User Manual

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch

SNMP Engine ID

The Engine ID is a unique identifier used for SNMP V3 implementations. This is an alphanumeric
string used to identify the SNMP engine on the Switch. To display the Switch's SNMP Engine ID,
open the SNMP Manger folder, (located in the Administration) folder and click on the SNMP
Engine ID link. This will open the SNMP Engine ID Configuration window, as shown below.
Figure 6- 31. SNMP Engine ID Configuration window
To change the Engine ID, type the new Engine ID in the space provided and click the Apply button.

Single IP Management Settings

All DES-3800 Series switches are set as Candidate (CaS) switches, as their factory default
configuration and Single IP Management will be disabled. To enable SIM for the Switch using the
Web interface, go to the Administration folder and click Single IP Management > SIM Settings
link, revealing the following window.
Figure 6- 32. SIM Settings window (disabled)
Change the SIM State to Enabled using the pull-down menu and click Apply. The window will then
refresh and the SIM Settings window will look like this:
Figure 6- 33. SIM Settings window (enabled)
65