Configure Local Enable Password - D-Link xStack DES-3800 Series User Manual

To define an Enable Login Method List, set the following parameters and click Apply:
Parameter
Method List Name
Method 1, 2, 3, 4

Configure Local Enable Password

This window will configure the locally enabled password for the Enable Admin command. When a
user chooses the "local_enable" method to promote user level privileges to administrator privileges, he
or she will be prompted to enter the password configured here that is locally set on the Switch.
To view the following window, click Security > Access Authentication Control > Configure Local
Enable Password:
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Figure 11- 27. Enable Method List - Add window
Description
Enter a method list name defined by the user of up to 15 characters.
The user may add one, or a combination of up to four of the following authentication
methods to this method list:
local_enable - Adding this parameter will require the user to be
•
authenticated using the local enable password database on the Switch. The
user in the next section entitled Local Enable Password must set the local
enable password.
none - Adding this parameter will require an authentication to access the
•
Switch.
radius - Adding this parameter will require the user to be authenticated using
•
the RADIUS protocol from a remote RADIUS server.
tacacs - Adding this parameter will require the user to be authenticated
•
using the TACACS protocol from a remote TACACS server.
xtacacs - Adding this parameter will require the user to be authenticated
•
using the XTACACS protocol from a remote XTACACS server.
tacacs+ - Adding this parameter will require the user to be authenticated
•
using the TACACS protocol from a remote TACACS server.
server_group - Adding a previously configured server group will require the
•
user to be authenticated using a user-defined server group previously
configured on the Switch.
223