D-Link xStack DES-3800 Series User Manual page 73

In the SNMP Manager folder, located in the Administration folder, click on the SNMP User Table
link. This will open the SNMP User Table window, as shown below.
To delete an existing SNMP User Table entry, click the X below the Delete heading corresponding to
the entry you wish to delete.
To display the detailed entry for a given user, click on the hyperlinked User Name. This will open the
SNMP User Table Display window, as shown below.
The following parameters are displayed:
Parameter Description
User Name
Group Name
SNMP Version
Auth-Protocol
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Figure 6- 20. SNMP User Table window
Figure 6- 21. SNMP User Table Display window
An alphanumeric string of up to 32 characters. This is used to identify the SNMP
users.
This name is used to specify the SNMP group created can request SNMP messages.
V1 - Indicates that SNMP version 1 is in use.
V2 - Indicates that SNMP version 2 is in use.
V3 - Indicates that SNMP version 3 is in use.
None - Indicates that no authorization protocol is in use.
MD5 - Indicates that the HMAC-MD5-96 authentication level will be used.
SHA - Indicates that the HMAC-SHA authentication protocol will be used.
57