Authentic Radius Server - D-Link xStack DES-3800 Series User Manual

Layer 3 stackable fast ethernet managed switch
Hide thumbs Also See for xStack DES-3800 Series:
Table of Contents

Advertisement

TxPeriod [30 ]
QuietPeriod [60 ]
SuppTimeout [30 ]
ServerTimeout [30 ]
MaxReq [2 ]
ReAuthPeriod [3600]
ReAuth <Disabled>
Capability
Click Apply to implement your configuration changes.

Authentic RADIUS Server

The RADIUS feature of the Switch allows you to facilitate centralized user administration as well as
providing protection against a sniffing, active hacker. The Web Manager offers three windows.
Click Security > 802.1x > Authentic Radius Server to open the RADIUS Server Authentication
Setting window shown below:
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
The default setting is Auto.
This sets the TxPeriod of time for the authenticator PAE state machine. This value
determines the period of an EAP Request/Identity packet transmitted to the client. The
default setting is 30 seconds.
This allows you to set the number of seconds that the Switch remains in the quiet
state following a failed authentication exchange with the client. The default setting is
60 seconds.
This value determines timeout conditions in the exchanges between the Authenticator
and the client. The default setting is 30 seconds.
This value determines timeout conditions in the exchanges between the Authenticator
and the authentication server. The default setting is 30 seconds.
The maximum number of times that the Switch will retransmit an EAP Request to the
client before it times out of the authentication sessions. The default setting is 2.
A constant that defines a nonzero number of seconds between periodic
reauthentication of the client. The default setting is 3600 seconds.
Determines whether regular reauthentication will take place on this port. The default
setting is Disabled.
This allows the 802.1x Authenticator settings to be applied on a per-port basis. Select
Authenticator to apply the settings to the port. When the setting is activated A user
must pass the authentication process to gain access to the network. Select None
disable 802.1x functions on the port.
211

Advertisement

Table of Contents
loading

Table of Contents