Switch Maintanence; Reset; Reset Config - D-Link xStack DES-3800 Series User Manual

Switch Maintanence

Reset

Reboot System
Save Changes
Log Out
Reset
The Reset function has several options when resetting the Switch. Some of the current configuration
parameters can be retained while resetting all other configuration parameters to their factory defaults.
NOTE: Only the Reset System option will enter the factory default parameters
into the Switch's non-volatile RAM, and then restart the Switch. All other options
enter the factory defaults into the current configuration, but do not save this
configuration. Reset System will return the Switch's configuration to the state it
was when it left the factory
Reset gives the option of retaining the Switch's User Accounts and History Log while resetting all
other configuration parameters to their factory defaults. If the Switch is reset using this window, and
Save Changes is not executed, the Switch will return to the last saved configuration when rebooted.

Reset Config

The Reset Config option will reset all of the Switch's configuration parameters to their factory
defaults, without saving these default values to the Switch's non-volatile RAM. If the Switch is reset
with this option enabled, and Save Changes is not executed, the Switch will return to the last saved
configuration when rebooted.
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Figure 13- 1.Reset window
Section 13
272