The page shown below is the Packet Content Mask configuration window.
Figure 10- 19. CPU Interface Filtering Configuration window- Packet Content
This screen will aid the user in configuring the Switch to mask packet headers beginning with the
offset value specified. The following fields are used to configure the Packet Content Mask:
Parameter
Profile ID (1-4)
Type
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Description
Type in a unique identifier number for this profile set. This value can be set from 1 - 5.
Select profile based on Ethernet (MAC Address), IP address or packet content mask.
This will change the menu according to the requirements for the type of profile.
Select Ethernet to instruct the Switch to examine the layer 2 part of each
•
187