Dns Relay; Dns Relay Global Settings - D-Link xStack DES-3800 Series User Manual

Interface
Server IP

DNS Relay

Computer users usually prefer to use text names for computers for which they may want to open a
connection. Computers themselves, require 32 bit IP addresses. Somewhere, a database of network
devices' text names and their corresponding IP addresses must be maintained.
The Domain Name System (DNS) is used to map names to IP addresses throughout the Internet and
has been adapted for use within intranets.
For two DNS servers to communicate across different subnets, the DNS Relay of the Switch must be
used. The DNS servers are identified by IP addresses.
Mapping Domain Names to Addresses
Name-to-address translation is performed by a program called a Name server. The client program is
called a Name resolver. A Name resolver may need to contact several Name servers to translate a
name to an address.
The Domain Name System (DNS) servers are organized in a somewhat hierarchical fashion. A single
server often holds names for a single network, which is connected to a root DNS server - usually
maintained by an ISP.
Domain Name Resolution
The domain name system can be used by contacting the name servers one at a time, or by asking the
domain name system to do the complete name translation. The client makes a query containing the
name, the type of answer required, and a code specifying whether the domain name system should do
the entire name translation, or simply return the address of the next DNS server if the server receiving
the query cannot resolve the name.
When a DNS server receives a query, it checks to see if the name is in its sub domain. If it is, the
server translates the name and appends the answer to the query, and sends it back to the client. If the
DNS server cannot translate the name, it determines what type of name resolution the client requested.
A complete translation is called recursive resolution and requires the server to contact other DNS
servers until the name is resolved. Iterative resolution specifies that if the DNS server cannot supply
an answer, it returns the address of the next DNS server the client should contact.
Each client must be able to contact at least one DNS server, and each DNS server must be able to
contact at least one root server.
The address of the machine that supplies domain name service is often supplied by a DHCP or
BOOTP server, or can be entered manually and configured into the operating system at startup.

DNS Relay Global Settings

To configure the DNS function on the Switch, click Layer 3 Features > DNS Relay > DNS Relay
Global Settings, which will open the DNS Relay Global Settings window, as seen below:
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
The IP interface on the Switch that will be connected directly to the Server.
Enter the IP address of the DHCP/BOOTP server. Up to four server IPs can be
configured per IP Interface
145