D-Link xStack DES-3800 Series User Manual page 91

The following fields can then be set in either the Add or Modify 802.1Q Static VLANs windows:
Parameter Description
VID (VLAN ID)
VLAN Name
Advertisement
Port Settings
Tag
None
Egress
Forbidden
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Figure 7- 7. 802.1Q Static VLAN window - Modify
Allows the entry of a VLAN ID in the Add window, or displays the VLAN ID of an
existing VLAN in the Modify window. VLANs can be identified by either the VID or the
VLAN name.
Allows the entry of a name for the new VLAN in the Add window, or for editing the
VLAN name in the Modify window.
Enabling this function will allow the Switch to send out GVRP packets to outside
sources, notifying that they may join the existing VLAN.
Allows an individual port to be specified as member of a VLAN.
Specifies the port as either 802.1Q tagging or 802.1Q untagged. Checking the box will
designate the port as Tagged.
Allows an individual port to be specified as a non-VLAN member.
Select this to specify the port as a static member of the VLAN. Egress member ports are
ports that will be transmitting traffic for the VLAN. These ports can be either tagged or
untagged.
Select this to specify the port as not being a member of the VLAN and that the port is
forbidden from becoming a member of the VLAN dynamically.
75