D-Link xStack DES-3800 Series User Manual page 109

The user may configure the following parameters to create a MSTI in the Switch.
Parameter
MSTI ID
Type
VID List (1-4094)
Click Apply to implement changes made.
To configure the settings for the CIST, click on its hyperlinked name in the Current MST Config-
uration Identification window, which will reveal the following window to configure:
The user may configure the following parameters to configure the CIST on the Switch.
Parameter
MSTI ID
Type
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Figure 7- 22. Instance ID Settings window – Add
Description
Enter a number between 1 and 15 to set a new MSTI on the Switch.
Create is selected to create a new MSTI. No other choices are available for this field
when creating a new MSTI.
This field is used to specify the VID range from configured VLANs set on the Switch.
Supported VIDs on the Switch range from ID number 1 to 4094.
Figure 7- 23. Instance ID Settings window - CIST modify
Description
The MSTI ID of the CIST is 0 and cannot be altered.
This field allows the user to choose a desired method for altering the MSTI settings.
The user has 2 choices.
Add VID - Select this parameter to add VIDs to the MSTI ID, in
•
conjunction with the VID List parameter.
Remove VID - Select this parameter to remove VIDs from the MSTI ID, in
•
93