First Time Connecting To The Switch - D-Link xStack DES-3800 Series User Manual

First Time Connecting to The Switch

The Switch supports user-based security that can allow you to prevent unauthorized users from
accessing the Switch or changing its settings. This section tells how to log onto the Switch.
NOTE: The passwords used to access the Switch are case-sensitive;
therefore, "S" is not the same as "s."
When you first connect to the Switch, you will be presented with the first login screen.
Press Enter in both the Username and Password fields. You will be given access to the command
prompt DES-3828:4# shown below:
There is no initial username or password. Leave the Username and Password fields blank.
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Figure 4- 1. Initial screen after first connection
NOTE: Press Ctrl+R to refresh the screen. This command can be
used at any time to force the console program in the Switch to
refresh the console screen.
20