D-Link xStack DES-3800 Series User Manual page 269

The following fields can be set or viewed:
Parameter
Time Interval
Record Number
64
65-127
128-255
256-511
512-1023
1024-1518
Show/Hide
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Figure 12- 14. Rx Size Analysis window (table)
Description
Select the desired setting between 1s and 60s, where "s" stands for seconds. The
default value is one second.
Select number of times the Switch will be polled between 20 and 200. The default
value is 20.
The total number of packets (including bad packets) received that were 64 octets in
length (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that were between 65
and 127 octets in length inclusive (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that were between
128 and 255 octets in length inclusive (excluding framing bits but including FCS
octets).
The total number of packets (including bad packets) received that were between
256 and 511 octets in length inclusive (excluding framing bits but including FCS
octets).
The total number of packets (including bad packets) received that were between
512 and 1023 octets in length inclusive (excluding framing bits but including FCS
octets).
The total number of packets (including bad packets) received that were between
1024 and 1518 octets in length inclusive (excluding framing bits but including FCS
octets).
Check whether or not to display 64, 65-127, 128-255, 256-511, 512-1023, and
1024-1518 packets received.
253