Introduction To Switch Management; Management Options; Web-Based Management Interface; Snmp-Based Management - D-Link xStack DES-3800 Series User Manual

Introduction To Switch Management

Management Options

Web-based Management Interface

SNMP-Based Management

Managing User Accounts
Command Line Console Interface Through The Serial Port

Connecting the Console Port (RS-232 DCE)

First Time Connecting to The Switch
Password Protection
SNMP Settings
IP Address Assignment
Management Options
This system may be managed out-of-band through the console port on the front panel or in-band using
Telnet. The user may also choose the web-based management, accessible through a web browser.
Web-based Management Interface
After you have successfully installed the Switch, you can configure the Switch, monitor the LED
panel, and display statistics graphically using a web browser, such as Netscape Navigator (version 6.2
and higher) or Microsoft® Internet Explorer (version 5.0).
SNMP-Based Management
You can manage the Switch with an SNMP-compatible console program. The Switch supports SNMP
version 1.0, version 2.0 and version 3.0. The SNMP agent decodes the incoming SNMP messages and
responds to requests with MIB objects stored in the database. The SNMP agent updates the MIB
objects to generate statistics and counters.
Connecting the Console Port (RS-232 DCE)
The Switch provides an RS-232 serial port that enables a connection to a computer or terminal for
monitoring and configuring the Switch. This port is a female DB-9 connector, implemented as a data
terminal equipment (DTE) connection.
To use the console port, you need the following equipment:
A terminal or a computer with both a serial port and the ability to emulate a terminal.
•
A null modem or crossover RS-232 cable with a female DB-9 connector for the console port
•
on the Switch.
To connect a terminal to the console port:
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Section 4
18