Dvmrp Interface Settings - D-Link xStack DES-3800 Series User Manual

Use the pull down menu, choose Enabled, and click Apply to implement the DVMRP function on the
Switch.

DVMRP Interface Settings

To view the DVMRP Interface Table, click Layer 3 Features > IP Multicast Routing Protocol >
DVMRP Interface Settings. This menu allows the Distance-Vector Multicast Routing Protocol
(DVMRP) to be configured for each IP interface defined on the Switch. Each IP interface configured
on the Switch is displayed in the below DVMRP Interface Configuration dialog box. To configure
DVMRP for a particular interface, click the corresponding hyperlink for that IP interface. This will
open the DVMRP Interface Settings window:
The following fields can be set:
Parameter
Interface Name
IP Address
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Figure 8- 55. DVMRP Global Settings window
Figure 8- 56. DVMRP Interface Table
Figure 8- 57. DVMRP Interface Settings window
Description
Displays the name of the IP interface for which DVMRP is to be configured. This must
be a previously defined IP interface.
Displays the IP address corresponding to the IP Interface name entered above.
157