Web Pages - D-Link xStack DES-3800 Series User Manual

Area 2
Area 3

Web Pages

When you connect to the management mode of the Switch with a web browser, a login window is
displayed. Enter a user name and password to access the Switch's management mode.
Below is a list and description of the main folders available in the web interface:
Administration – Contains windows concerning Device Information, IP Address, Port Configuration,
User Accounts, Port Mirroring, System Log Settings, System Severity Settings, SNTP Settings, MAC
Notification Settings, TFTP Services, Mulitple Image Services, Ping Test, SNMP Manager, and Single
IP Management Settings
Layer 2 Features – Contains windows concerning VLAN, Trunking, IGMP Snooping, Spanning
Tree, and Forwarding.
Layer 3 Features – Contains windows concerning IP Interface Settings, MD5 Key Settings, Route
Redistribution Settings, Static/Dynamic Route Setings, Route Preference Settings, Static ARP
Settings, RIP, OSPF, DHCP/BOOTP Relay, DNS Relay, VRRP, and IP Multicast Routing Settings.
QoS – Contains windows concerning Bandwidth Control, QoS Scheduling Mechanism, QoS Output
Scheduling, 802.1P Default Priority and 802.1P User Priority.
ACL – Contains the window for Access Profile Table.
Security – Contains windows for Traffic Control, Port Security, Port Lock Entries, 802.1x, Trusted
Host, Access Authentication Control, Traffic Segmentation, SSL, SSH, and IP-MAC Binding.
Monitoring – Contains the window for Device Status, CPU Utilization, Port Utilization, Packet
Errors, Packet Size, Browse Router Port, Port Access Control, MAC Address Table, IP Address Table,
Browse Routing Table, Browse ARP Table, Browse IP Mulitcast Forwarding Table, IGMP Snooping
Group, IGMP Snooping Forwarding, Browse IGMP Group Table, DVMRP Monitor, OSPF Monitor
and Switch Log.
Monitoring – Contains windows concerning monitoring the Switch, pertaining to Port Utilization,
CPU Utilization, Packets, Errors Size, MAC Address, IGMP Snooping Group, IGMP Snooping
Forwarding, VLAN Status, Router Port, Port Access Control and Layer 3 Feature.
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
the D-Link logo to go to the D-Link website.
Presents a graphical near real-time image of the front panel of the Switch. This area
displays the Switch's ports and expansion modules, showing port activity, duplex
mode, or flow control, depending on the specified mode.
Various areas of the graphic can be selected for performing management functions,
including port configuration.
Presents switch information based on your selection and the entry of configuration
data.
NOTICE: Any changes made to the Switch configuration
during the current session must be saved in the Save
Changes web menu (explained below) or use the command
line interface (CLI) command save.
NOTE: Be sure to configure the user name and password in
the User Accounts menu before connecting the Switch to the
greater network.
28