Show Interfaces Switchport - D-Link DES-3010GA Cli Manual

D-Link DES-3010FA/GA CLI Reference Guide

show interfaces switchport

The show interfaces switchport Privileged EXEC mode command displays the switchport configuration.
Syntax
show interfaces switchport {ethernet interface | port-channel port-channel-number}
Parameters
•
interface — A valid Ethernet port number.
•
port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the switchport configuration for Ethernet port 1.
Console# show interface switchport ethernet 1
Port 1:
VLAN Membership mode: General
Operating parameters:
PVID: 1 (default)
Ingress Filtering: Enabled
Acceptable Frame Type: All
GVRP status: Enabled
Protected: Enabled, Uplink is 8.
Port 1 is member in:
Vlan Name
---- -------
1 default
8 VLAN008
11 VLAN011
19 IPv6 VLAN
72 VLAN0072
Egress rule Type
----------- -------
untagged System
tagged Dynamic
tagged Static
untagged Static
untagged Static
Page 309