Ip Igmp Snooping Host-Time-Out - D-Link DES-3010GA Cli Manual

Layer 2 switch, managed 8 port 10/100base-tx with gigabit & fiber uplinks
Hide thumbs Also See for DES-3010GA:
Table of Contents

Advertisement

ip igmp snooping host-time-out

The ip igmp snooping host-time-out Interface Configuration (VLAN) mode command configures the host-time-
out. If an IGMP report for a multicast group was not received for a host-time-out period from a specific port, this
port is deleted from the member list of that multicast group. To return to the default configuration, use the no form
of this command.
Syntax
ip igmp snooping host-time-out time-out
no ip igmp snooping host-time-out
Parameters
time-out — Host timeout in seconds. (Range: 1 - 2147483647)
Default Configuration
The default host-time-out is 260 seconds.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
The timeout should be at least greater than 2*query_interval+max_response_time of the IGMP router.
Example
The following example configures the host timeout to 300 seconds.
Console(config)# interface vlan 2
Console(config-if)# ip igmp snooping host-time-out 300
Page 108
IGMP Snooping Commands

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Des-3010fa

Table of Contents