D-Link DES-3010GA Cli Manual page 269

Examples
The following example discovers the routes that packets will actually take when traveling to their destination.
Console> traceroute umaxp1.physics.lsa.umich.edu
Type Esc to abort.
Tracing the route to umaxp1.physics.lsa.umich.edu (141.211.101.64)
1 i2-gateway.stanford.edu (192.68.191.83)
2 STAN.POS.calren2.NET (171.64.1.213) 0 msec 0 msec 0 msec
3 SUNV--STAN.POS.calren2.net (198.32.249.73) 1 msec 1 msec 1 msec
4 Abilene--QSV.POS.calren2.net (198.32.249.162)
5 kscyng-snvang.abilene.ucaid.edu (198.32.8.103)
6 iplsng-kscyng.abilene.ucaid.edu (198.32.8.80)
7 so-0-2-0x1.aa1.mich.net (192.122.183.9)
8 atm1-0x24.michnet8.mich.net (198.108.23.82)
9 * * *
10 A-ARB3-LSA-NG.c-SEB.umnet.umich.edu (141.211.5.22) 58 msec 58 msec 58 msec
11 umaxp1.physics.lsa.umich.edu (141.211.101.64)
The following table describes significant fields shown above.
Field
1
i2-gateway.stanford.edu
192.68.191.83
1 msec 1 msec 1 msec
The following table describes characters that may appear in the traceroute command output.
Field
*
?
A
F
H
N
P
Q
R
S
U
0 msec 0 msec 0 msec
56 msec
Description
Indicates the sequence number of the device in the path to the host.
Host name of this device.
IP address of this device.
Round-trip time for each probe sent.
Description
The probe timed out.
Unknown packet type.
Administratively unreachable. Usually, this output indicates that an access list is
blocking traffic.
Fragmentation is required and DF is set.
Host unreachable.
Network unreachable.
Protocol unreachable.
Source quench.
Fragment reassembly time exceeded.
Source route failed.
Port unreachable.
Page 268
1 msec 1 msec 1 msec
33 msec 35 msec 35 msec
47 msec 45 msec 45 msec
53 msec 54 msec
56 msec 56 msec 57 msec
62 msec 63 msec 63 msec
System Management