Section 6. Ethernet Configuration Commands; Interface Ethernet - D-Link DES-3010GA Cli Manual

Ethernet Configuration Commands

Section 6. Ethernet Configuration Commands

interface ethernet

The interface ethernet Global Configuration mode command enters the interface configuration mode to configure
an Ethernet type interface.
Syntax
interface ethernet interface
Parameters
•
interface — Valid Ethernet port. (Full syntax: port)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables configuring Ethernet port 7.
Console(config)# interface ethernet 7
Page 72