show qos interface
The show qos interface User EXEC mode command displays interface QoS information.
Syntax
show qos interface [ethernet interface-number | vlan vlan-id | port-channel number] [ queueing | rate-limit]
Parameters
•
interface-number — Valid Ethernet port number.
•
vlan-id— Valid VLAN ID.
•
number — Valid port-channel number.
•
queuing — Indicates the queue strategy (WRR or EF), the weight for WRR queues, the CoS to queue map
and the EF priority.
•
rate-limit Display the rate-limit configuration.
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC mode
User Guidelines
If no keyword is specified, port QoS information (e.g., DSCP trusted, CoS trusted, untrusted, etc.) is displayed.
If no interface is specified, QoS information about all interfaces is displayed.
Examples
The following example displays QoS information about Ethernet port 7.
Console> show qos interface ethernet 7 queuing
Ethernet
7
wrr bandwidth weights and EF priority:
qid
weights
1
25
2
25
3
25
4
25
Cos-queue map:
cos
qid
0
2
1
1
2
1
Ef
Priority
dis
N/A
dis
N/A
dis
N/A
dis
N/A
Page 164
QoS Commands