Ip Name-Server - D-Link DES-3010GA Cli Manual

D-Link DES-3010FA/GA CLI Reference Guide

ip name-server

The ip name-server Global Configuration mode command defines the available name servers. To remove a
name server, use the no form of this command.
Syntax
ip name-server server-address [server-address2 ... server-address8]
no ip name-server [server-address1 ... server-address8]
Parameters
•
server-address — Specifies IP addresses of the name server.
Default Configuration
No name server addresses are specified.
Command Mode
Global Configuration mode
User Guidelines
The preference of the servers is determined by the order in which they were entered.
Up to 8 servers can be defined using one command or using multiple commands.
Examples
The following example sets the available name server.
Console(config)# ip name-server 176.16.1.18
Page 123