Package Contents; Device Interfaces - D-Link DQS-5000-32Q28 Quick Installation Manual

Package Contents

Open the shipping carton of the switch and carefully unpack its contents. Please consult
the packing list to make sure all items are present and undamaged. If any item is missing
or damaged, please contact your local reseller for replacement.
One DQS-5000-32Q28 switch

Two AC power cords

One console cable (RJ-45 to RS-232)

One rack mounting kit (two brackets and screws)

Four rubber feet with adhesive backing

One Quick Installation Guide

Note: the model you have purchased may appear slightly different from those shown in the
illustrations.

Device Interfaces

Model
DQS-5000-32Q28
LEDs
LED
PSU 1
PSU 2
FAN
STAT
Port
100GBase-X QSFP28
ports
USB 2.0 port
RJ-45 console port
10/100/1000Base-T RJ-45
management port
Status Description
Solid green The switch is powered on and functioning normally.
Solid amber The switch's power supply has failed or is not working properly.
Light off The switch is turned off.
Solid green The switch is powered on and functioning normally.
Solid amber The switch's power supply has failed or is not working properly.
Light off The switch is turned off.
Solid green The fans are operating normally.
Solid amber A fan has failed. Check the FAN Status LED on the rear panel to
identify which fan is malfunctioning.
Light off The fans are powered off.
Solid green The diagnostic test was successfully completed.
Solid amber The self-diagnostics system has detected a fault.
Light off The system is down, the switch is booting up, or the network OS
Description
32 QSFP28 ports (100 Gbps connection speed).
USB 2.0 Type-A port for connecting a USB storage
device.
RJ-45 console port for connecting to a PC with a RJ-45
console cable (included in the package). The Command
Line Interface (CLI) is used for configuring the switch.
Out-of-band management port for configuring the switch
without being connected to the network (10/100/1000
Mbps connection speed).
2