Spanning-Tree Mst Max-Hops - D-Link DES-3010GA Cli Manual

D-Link DES-3010FA/GA CLI Reference Guide

spanning-tree mst max-hops

The spanning-tree mst priority Global Configuration mode command configures the number of hops in an MST
region before the BDPU is discarded and the port information is aged out. To return to the default configuration,
use the no form of this command.
Syntax
spanning-tree mst max-hops hop-count
no spanning-tree mst max-hops
Parameters
•
hop-count—Number of hops in an MST region before the BDPU is discarded .(Range: 1-40)
Default Configuration
The default number of hops is 20.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the maximum number of hops that a packet travels in an MST region before it is
discarded to 10.
Console (config) # spanning-tree mst max-hops 10
Page 237