Clear Spanning-Tree Detected-Protocols - D-Link DES-3010GA Cli Manual

clear spanning-tree detected-protocols

The clear spanning-tree detected-protocols Privileged EXEC mode command restarts the protocol migration
process (forces renegotiation with neighboring devices) on all interfaces or on a specified interface.
Syntax
clear spanning-tree detected-protocols [ethernet interface | port-channel port-channel-number]
Parameters
•
interface — A valid Ethernet port.
•
port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode
User Guidelines
This feature should be used only when working in RSTP or MSTP mode.
Example
The following example restarts the protocol migration process on Ethernet port 5.
Console# clear spanning-tree detected-protocols ethernet 5
Page 234
Spanning-Tree Commands