Tilt Angle Tension Adjustment - Crestron Isys i/O TPMC-15-CH Operation Manual

Touchpanel Media Centers
20 Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17 Tilt Series
Crestron Isys i/O
The TPMC-15-CH and TPMC-17-CH include a "triamese" cable that provides (1)
CAT5 video line, (1) CAT5 audio line, and (1) Cresnet connection between the
touchpanel and the TPMC-CH-IMC.
For more information on the TPMC-CH-IMC, refer to the latest revision of the
TPMC-CH-IMC Operations Guide (Doc. 6345).
QM-TX QuickMedia Transmitter (QM Versions Only)
To connect an RGB, video, or audio source to a QuickMedia network without a
locally available QM transmitter (such as the QM-WMC), the QM-TX QuickMedia
Transmitter can be used to connect a source to a device with a QM input.
The QM-TX accepts composite video, S-video, component video, RGBHV, and
audio signals. These signals are encoded and converted to the QuickMedia standard
and fed over a CAT5E or CAT6 cable to a QM receiver (such as the
TPMC-15/17-QM). All signal routing occurs automatically under the command of
the control system.
For more information, refer to the latest version of the QuickMedia Transmitter:
QM-TX Operations Guide (Doc. 6334).

Tilt Angle Tension Adjustment

Use a 5/32 inch socket (supplied by other) with a hex drive key (allen wrench) to
increase or decrease pivot tension at the base of the touchscreen. Turning the key
clockwise increases tension, counterclockwise decreases tension.
Tension Adjustment Screw
REQUIRES
TURN CLOCKWISE TO TIGHTEN
TURN COUNTER-CLOCKWISE TO LOOSEN
™
TPMC-15/17 Tilt Series
TENSION SCREW
5
in. HEX KEY
32
Operations Guide - DOC. 6344