Crestron Isys i/O TPMC-15-CH Operation Manual page 40

Touchpanel Media Centers
"Video Setup" Window - Input 1 Tab – QM Version
36 Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17 Tilt Series
Crestron Isys i/O
Input 1 & Input 2
The "Video Setup" window has tabs for adjusting peak, boost, skew (QM Input #1
only), and preset settings for each of the inputs as shown in the following image.
Changes are made in real time.
Adjust peak and boost to compensate for white or black streaking. On Input #1 of
QM versions, adjustments for red, green, and blue skew are available to compensate
for the varying distances that a video signal must travel in a QM cable.
NOTE: QM Input #2 on the TPMC-15-QM and the TPMC-17-QM does not have
adjustments for skew compensation.
Up to 255 preset locations are available to store settings for peak, boost, and skew. In
QM systems using auto compensation, the touchpanel can be set to automatically
recall preset values upon receipt of a QM ID by selecting Auto Load on QM ID.
For more information on auto compensation, refer to the latest version of the
Crestron Isys i/O™ TPMC-15 & TPMC-17 Series Programming Guide (Doc. 6350).
™
TPMC-15/17 Tilt Series
Operations Guide - DOC. 6344