Crestron Isys i/O TPMC-15-CH Operation Manual page 36

Touchpanel Media Centers
32 Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17 Tilt Series
Crestron Isys i/O
Select the following Test Patterns, in the following order, and adjust the display as
necessary.
1. Vertical Lines
2. Grid
3. Color Bars
4. Grayscale Gradient
5. Frequency Adjust Test
6. Streak Test
7. Skew Test
8. RGB Gradient
Select Project
Permits the selection of the touchpanel program, a .vtz file. The default file location
is the internal flash. To select a project from the internal flash, select Browse and
select the compiled project to be loaded.
If loading an external file, check External as the Project Working Path and use the
Select button to select the network drive and/or flash drive where the compiled
project is located. After selecting the location of the compiled project, select Browse
to find the compiled project file.
NOTE: Selecting the External option permits you to connect to a network drive,
USB devices, and the PC Card ports on the rear of the TPMC-15 or TPMC-17.
NOTE: If External is checked, the display list cannot be viewed via Crestron
Toolbox.
After the compiled project has been selected, press Load to load the project to the
touchpanel.
"Select Project" Window – Project to Load
RGB Video
Each one of the RGB (QM versions only) and video inputs is selected and adjusted
from this window. Click on an input tab and adjust the settings for the selected input.
™
TPMC-15/17 Tilt Series
Operations Guide - DOC. 6344