Tilt Angle Tension Adjustment; Industry Compliance - Crestron Isys TPS-4000 Operation Manual

®
Crestron Isys TPS-4000
Operations Guide - DOC. 6268
Interface Modules
Connect the TPS-4000 to an outboard interface module, which provides expanded
network, video, and audio connections for the touchpanel system. A 15-foot
connecting cable assembly is supplied. Cable assemblies of other lengths are
available and can be purchased from Crestron. There are two interface modules
available: TPS-IMPC and TPS-IMW.
The TPS-IMPC is supplied with every TPS-4000. This module is housed in a black
enclosure with a labeled top panel and network, interface, audio, and video
connectors. At the shorter sides of the unit, the enclosure extends to form feet at a
right angle to the side. These feet have mounting holes. Consult the latest revision of
the TPS-IMPC Operations Guide (Doc. 6162) for more details.
The TPS-IMW is not provided with the TPS-4000; it must be purchased separately.
This unit installs into a two-gang electrical box (2.5-inch depth minimum). A
®
Decora -style wallplate can be mounted over the unit once it is installed to offer a
more eye-pleasing appearance. Consult the latest revision of the TPS-IMW
Operations & Installation Guide (Doc. 5857) for more details.

Tilt Angle Tension Adjustment

Use a 9/64 in (3.5 mm) socket (supplied by other) with a hex drive key (allen
wrench) to increase or decrease pivot tension at the base of the touchscreen. Turning
the key clockwise increases tension, counterclockwise decreases tension.
Tension Adjustment Screw

Industry Compliance

As of the date of manufacture, the TPS-4000 has been tested and found to comply
with specifications for CE marking and standards per EMC and
Radiocommunications Compliance Labelling (N11785).
NOTE: This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and
10.4 Inch Tilt Touchpanel: Crestron Isys
10.4 Inch Tilt Touchpanel
®
TPS-4000 • 7