Crestron Isys i/O TPMC-15-CH Operation Manual page 66

Touchpanel Media Centers
62 Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17 Tilt Series
Crestron Isys i/O
the Crestron Toolbox become the default touchpanel project. Other touchpanel
projects can be selected from the "Select Project" section of the SETUP MENU
described on page 32.
Upload via VT Pro-e
1. Start VT Pro-e.
2. Select File | Open | Project to view the "Open" window, navigate to the
VT Pro-e file (.vtp), and click Open.
3. Select File | Upload Project. This automatically selects the compiled .vtz
file.
Upload via Crestron Toolbox
1. Verify that the procedure for "Establishing Communications" that begins on
page 50 has been performed to establish a connection between the PC and
the touchpanel.
2. Open Crestron Toolbox.
3. Select Tools | System Info.
Crestron Toolbox – Tools | System Info
4. When the "System Info" window appears, select the touchpanel where the
program will be uploaded. The Functions option becomes available from
the menu bar.
5. Select Functions | Project.
6. The "Project" window is used to select the project to be uploaded to the
touchpanel.
™
TPMC-15/17 Tilt Series
Operations Guide - DOC. 6344