Crestron Isys i/O TPMC-15-CH Operation Manual page 23

™
Crestron Isys i/O
Operations Guide - DOC. 6344
TPMC-15/17 Tilt Series
Pushbuttons
Five pushbuttons are located on the top of the base as shown in the diagram below.
The leftmost button is recessed and is a hard reset used to reboot the touchpanel. The
other four buttons are programmable. Refer to the latest version of the Crestron Isys
i/O™ TPMC-15 & TPMC-17 Series Programming Guide (Doc. 6350) for more
information.
TPMC-15/17 Pushbuttons
For information on rebooting or shutting down the touchpanel, refer to
"SHUTDOWN Details" on page 47.
TPMC-CH-IMC Interface Module (CH Versions Only)
For networks without CAT5 audio and video, the TPMC-CH-IMC is included to
convert unbalanced video sent over coax cable and balanced/unbalanced audio sent
over shielded, twisted-pair wiring to CAT5 cabling for connection to the
TPMC-15-CH or TPMC-17-CH touchpanels.
NOTE: When using a TPMC-CH-IMC to provide video and audio to the
touchpanel, any source that is to use the second input will only be able to send video
to the touchpanel as the audio port will be connected to the audio output of the
TPMC-CH-IMC. To maximize the usability of the touchpanel's A/V ports, Crestron
recommends connecting the touchpanel's video inputs to the CAT5 outputs of a
CNX-PVID8x4 (or similar device) and the audio port to a CAT5 port of a
CNX-BIPAD8 (or similar device). Contact Crestron's True Blue Support for a
solution that is specific to your system.
Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17 Tilt Series
Touchpanel Media Centers
19