®
Crestron Isys
TPS-3000
Programming Software
Operations Guide – DOC. 6076A
Tilt Angle Tension Adjustment
Use a 9/64 in (3.5 mm) hex drive key (Allen wrench) to increase or decrease pivot
tension at the base of the touchscreen. Turning the key clockwise increases tension,
counterclockwise decreases tension.
Have a question or comment about Crestron software?
Answers to frequently asked questions (FAQs) can be viewed in the Online Help
section of the Crestron website. To post a question or view questions you have
submitted to Crestron's True Blue Support, log in at http://support.crestron.com.
First-time users will need to establish a user account.
Configuration is easy thanks to Crestron's Windows
Crestron SystemBuilder™ software creates a complete project, with no special
programming required. SystemBuilder completes all necessary programming for a
base system including all touchpanel screens and the control system program. The
program output of SystemBuilder is a SIMPL Windows program with much of the
functionality encapsulated in macros and templates. Once SystemBuilder creates the
project, the system interfaces and program logic can be customized in
SystemBuilder. Modifications are easily accomplished with Crestron development
tools (i.e., SIMPL Windows and Crestron VisionTools
packages).
NOTE: Modifications to the program that are made outside of SystemBuilder (for
example, in VT Pro-e or SIMPL windows) are not preserved when you reenter
SystemBuilder.
SystemBuilder comes with templates for all supported interfaces. If a user wishes to
create a touchpanel project using templates with a different look-and-feel, this can be
accomplished by making a custom template. This custom template can then be used
by SystemBuilder to create the final project files to be loaded into the panels.
6.4 Inch Tilt Touchpanel: Crestron Isys
6.4 Inch Tilt Touchpanel
®
-based programming software.
®
Pro-e (VT Pro-e) software
®
TPS-3000 • 21