Setup; Printing - Fuji Xerox ApeosPort-IV C4430 User Manual

For information on how to set Private Charge Print, refer to "5 Tools" > "Authentication/Security
Settings" > "Authentication" > "Charge/Private Print Settings" in the Administrator Guide. For
information on how to print a Private Charge Print job, refer to "Private Charge Print" (P.350).

Setup

To print from your computer, your computer must have a print driver installed.
For information on how to install the print driver, refer to the manual included in the Driver CD Kit.
Note • When printing using authentication information, you must configure the printer settings on

Printing

This following describes how to print documents.
The printing procedure depends on the application software you use. For more
information, refer to the documentation provided with the application.
For more information on print features, click [Help] on the print driver screen to view the print driver's
help.
Move the lever of the fusing unit down to set to the Envelope mode before printing on an envelope.
Return the lever to its original position before printing on other types of papers. Any type of paper other
than envelope cannot be printed while the lever is set to the Envelope mode position. For information on
how to switch the lever of the fusing unit, refer to "2 Paper and Other Media" > "Loading Paper" >
"Loading an Envelope in Tray 1 to 4" or "Loading an Envelope in Tray 5" in the Administrator Guide.
1
Select [Print] from the [File] menu on the application.
2
Confirm [Printer Name] and click [Properties] if necessary.
3
Set the properties if necessary.
Note • You can change the print feature in [Job
4
Click [OK].
5
Click [OK] in the [Print] dialog box.
your computer. Make the necessary settings on the [Configuration] tab of the printer's
properties. For more information, refer to the print driver's help.
Type].
Print
12
361