Step 5 Confirming The Fax Job In Job Status - Fuji Xerox ApeosPort-IV C4430 User Manual

Note • Depending on the settings, the screen to re-enter the recipient may be displayed after
• If a problem occurs, an error message appears on the touch screen. Solve the problem
If you have more documents
If you have more documents to fax, select [Next Original] on the touch screen while the
current document is being scanned. This allows you to send the documents as one set
of data.
2
While documents are being scanned, select
[Next Original].
Note • When using the document feeder, load
• When [Next Original] is displayed on the
• You can change the scan settings of the
3
Load the next document.
4
Press the <Start> button.
If you have more documents, repeat steps 3 and 4.
5
When all documents have been scanned,
select [Last Original].

Step 5 Confirming the Fax Job in Job Status

The following describes how to confirm the status of a fax job.
pressing the <Start> button. In this case, re-enter the recipient.
according to the message.
the next document after the machine has
finished scanning the first document.
screen shown on the right and no
operation is performed during a certain
period of time, the machine automatically
assumes that there are no more documents.
next document by selecting [Resolution],
[Original Size], and [Lighten/Darken] that
are displayed after selecting [Next
Original].
Fax Procedure
4
147