Fuji Xerox ApeosPort-IV C4430 User Manual page 213

Note • You can specify up to 20 locations for relay recipients.
F Code Method
When using the machine as the initiating station for performing Remote Relay
Broadcast, confirm the F Code and the password (if necessary) for the primary relay
station.
Important • When using the F Code method for Remote Relay Broadcast, the primary relay stations and
Note • When performing Relay Broadcast with Fuji Xerox manufactured machines that can be used
1
Select the [Fax/Internet Fax Options] tab to
display the [Fax/Internet Fax Options]
screen.
2
Select [F Code].
3
Select [On].
4
Select the [F Code] box, and enter the F Code with the numeric keypad.
Note • You can enter up to 20 digits for the F Code.
Relay Broadcast
Relay Broadcast
The number of digits of the primary relay station ID:
1: When the primary relay station IDs and address numbers are two digits
2: When the primary relay station IDs and address numbers are three digits
Print Directive
secondary relay stations must support our F Code method and the Relay Broadcast feature.
as both an initiating station and a relay station, we recommend that you use the fax signal
method.
Print Primary
Directive Relay
Station ID
Up to 20 digits
Address Address
Number Number
....
Broadcast
4
213