Fuji Xerox ApeosPort-IV C4430 User Manual page 185

1
Select [Priority Send/Delay Start].
2
Select any option.
Priority Send
Off
Priority Send is not applied.
On
Priority Send is applied.
Note • If the Priority Send feature is selected during transmission, the fax will be sent after the
• In redial mode, the fax will be resent preferentially after the specified redial interval.
• The Priority Send feature cannot be set separately for each recipient of Broadcast and multi-
You can give priority to a pending job. For more information, refer to "Job Status" (P.337).
Delay Start
Off
Delay Start is not applied.
Specific Time
Delay Start is applied.
Note • You can specify a time within 24 hours in 1 minute increments. You cannot specify a date.
• You can set [Delay Start] independently for each address number. For information on how to
• If you use address numbers or group dial numbers to specify recipients for the Broadcast
• If the fax cannot be sent at the specified time because, for example, the telephone line is
Specific Time
Displays the [Delay Start - Specific Time] screen.
Refer to "[Delay Start - Specific Time] Screen" (P.185).
[Delay Start - Specific Time] Screen
This screen allows you to specify the start time for fax transmission.
current transmission ends.
polling jobs.
register address numbers, refer to "5 Tools" > "Setup" > "Add Address Book Entry" in the
Administrator Guide.
Send feature, the [Delay Start] setting specified for each address number is invalid.
busy, it will be sent as soon as the line becomes available.
Fax/Internet Fax Options
185
4