Deleting Stored Programs - Fuji Xerox ApeosPort-IV C4430 User Manual

8 Stored Programming
1
Select [Store Build Job].
Note
2
Select a number to register a stored program.
Note
3
Set the feature you want to register.
Note
You can change the volume of the sound that notifies that a stored program is being registered. For
information on the settings, refer to "5 Tools" > "Common Service Settings" > "Audio Tones" > "Stored
Programming Tone" in the Administrator Guide.
4
Press the <Start> or <Clear All> button.
Note
For information on how to name a registered stored program, refer to "Entering/Changing a Stored
Program Name" (P.317).

Deleting Stored Programs

8
The following describes how to delete stored programs.
1
Select [Delete].
2
Select the number to deleted.
Note
3
Select [Delete].
Delete
Deletes the stored program.
316
• Once a job is stored to a button, it cannot
be overwritten.
• Select [ ] to return to the previous
screen or [ ] to move to the next screen.
• Once a job is stored to a button, it cannot be overwritten.
• Select [ ] to return to the previous screen or [
• The machine sounds an audible tone while a stored program is being registered.
• Press the <Interrupt> button to cancel registration.
• An icon is displayed to the left of each registered stored program for Build Job.
• If no name is entered for a registered stored program, the name becomes "No Name".
• Select [ ] to return to the previous screen or [
] to move to the next screen.
] to move to the next screen.