Copy Output (Specifying Finishing Options) - Fuji Xerox ApeosPort-IV C4430 User Manual

3 Copy
Separator Tray
Allows you to select the paper tray to be used for the separators.
Select [More] to display the [Paper Supply - Separator] screen on which you can
select a tray.
Note
When [Tray 5] is selected, the [Tray 5] screen is displayed. For more information, refer to "[Tray 5]
Screen" (P.79).
Separator & Handout
Allows you to select the paper tray to be used for the separators and handouts.
Select [More] to display the [Paper Supply - Separator & Handout] screen on which
you can select a tray.
Note
When [Tray 5] is selected, the [Tray 5] screen is displayed. For more information, refer to "[Tray 5]
Screen" (P.79).
Handout Tray
3
Allows you to select the paper tray to be used for the handouts.
Select [More] to display the [Handout Tray] screen on which you can select a tray.
Note
When [Tray 5] is selected, the [Tray 5] screen is displayed. For more information, refer to "[Tray 5]
Screen" (P.79).

Copy Output (Specifying Finishing Options)

This feature allows you to select finishing options.
Note
If the finisher is installed, each set of copies can be stapled, and then output.
1
Select [Copy Output].
2
Select any option.
Auto
Copies are collated when the originals are loaded on the document feeder. Copies are
also collated when the originals are loaded on the document glass and any of the
following features is used: 2 Sided Book Copying, Covers, Blank Separators &
126
• When you use the bypass tray, select [Tray 5] on the [Separator Tray] screen.
• When you use the bypass tray, select [Tray 5] on the [Separator & Handout Tray] screen.
• When you use the bypass tray, select [Tray 5] on the [Handout Tray] screen.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.