Transparency Options (Inserting Blank Sheets Between Transparencies) - Fuji Xerox ApeosPort-IV C4430 User Manual

8 Times
Makes eight copies of the document image on a single sheet of paper.

Transparency Options (Inserting Blank Sheets between Transparencies)

This feature allows you to insert blank separators between output transparency sheets.
At the same time, you can make copies for handouts.
Important • Using transparency sheets for color (with white border) may cause a malfunction or paper
Note • When loading A4 size transparencies on Tray 5 (Bypass), we recommend that you load
• Load transparency sheets in a tray in the same orientation as the paper to be used for
1
Select [Transparency Options].
2
Select any option.
Off
Does not insert separators.
Blank Transparency Separators
Inserts a separator each time a transparency is copied. Only one set of copies can be
made.
Blank Separators & Handouts
Inserts a separator each time a transparency is copied. At the same time, the required
number of copies is made for handouts.
Transparency Set & Handouts
Makes copies on transparencies. At the same time, the required number of copies is
made for handouts.
Transparency Tray
Allows you to select the paper tray to be used for the transparencies.
Select [More] to display the [Paper Supply - Transparency] screen on which you can
select a tray.
Note • When you use the bypass tray, select [Tray 5] on the [Transparency Tray] screen.
When [Tray 5] is selected, the [Tray 5] screen is displayed. For more information, refer to "[Tray 5]
Screen" (P.79).
jam.
them in portrait orientation.
handouts and separators.
Output Format
3
125