DC900/1100 Quick Reference Guide_
Transparency Separator
Steps
1. Load transparencies in Tray 5 ( Bypass Tray )
2. Load Documents
3. Select Separators
4. Select Options : Off, Blank Separators, Blank Separators + N sets or
No Separators + N sets
5. Press Start
Repeat Image
Steps
1. Load Document
2. Select Repeat image
3. Select Auto Repeat
4. Press Save
5. Select Scan Options
6. Select Original Size
7. Enter the X/Y axis using the measuring scale on platen glass
8. Press Save
9. Select Basic Copying
10. Select the Paper Supply : A4, A3
11. Press Start
_______________________________________________________________________________________________________
Reference No: Fuhji-0205-Rev01
______________________________________________
Page 12 of 16
Created by FXS CRO