Table of Contents
Advertisement
Crestron STX-1700CXP
2-Way RF Wireless Touchpanel:
STX-1700CXP
Introduction
Operations Guide – DOC. 6144
Functions and Features
The STX-1700CXP is a 2-way wireless radio frequency (RF) compact color
touchpanel that utilizes 2.4 GHz spread spectrum technology to provide a user
®
interface to a Crestron
control system (herein referred to as the Cresnet
The "Wi-Fi friendly" touchpanel is a handheld transceiver that communicates
through Crestron's gateway/transceiver, the TPS-RFGWX (sold separately), to the
Cresnet system. (Refer to "Wi-Fi Technology" and "Gateway Compatibility" on
page 2 for more details.) The 2-way communications provide control of third party
and Cresnet devices and dynamic onscreen feedback for real-time confirmation of
commands. Up to 15 touchpanels can communicate with one TPS-RFGWX. RF
signals can travel from a minimum of three feet up to a maximum between 100 - 200
feet; the range is dependent on location of the touchpanel, the construction of the
building, and obstructions and RF interference from other devices. Location and
antenna orientation of the TPS-RFGWX also are important factors in RF
reception/transmission.
Functional Summary
•
5.7" (14.78 cm) active color matrix display
•
320x240 screen resolution
•
63MIPs ColdFire processor running Crestron Isys
•
16-bit non-palette graphics
•
64,000-color Crestron Isys engine
•
4 MB of flash memory (approx. 3MB for user display lists)
•
8 MB of SDRAM
•
Built-in 10 "quick" pushbuttons
− Engraveable*
− Operate without waking display
•
Long-life NiMH battery
− Fast charging
− No battery memory
•
"Wi-Fi friendly" operating frequency selection to avoid interference
•
Compatible with TPS-RFGWX RF gateways that are not Wi-Fi friendly. **
*Customizable engraving available. Refer to "Appendix A" on page 30 for details.
**Refer to "Gateway Compatibility" on page 2 for details.
2-Way RF Wireless Touchpanel
2-Way RF Wireless Touchpanel: STX-1700CXP • 1
®
system).
™
-generation firmware
Advertisement
Table of Contents
