Crestron STX-1700CW
Wall Mount 2-Way RF Compact
Color Touchpanel: STX-1700CW
Introduction
Operations Guide - DOC. 6228A
Wall Mount 2-Way RF Compact Color Touchpanel
Functions and Features
The STX-1700CW is a 2-way radio frequency (RF) compact color touchpanel that,
when used with the supplied DA-1700CW docking assembly and BB-1700CW back
box, is wall mounted and provides a user interface to a Crestron
system (herein referred to as the Cresnet
assembly, which docks the touchpanel. The docking assembly provides operating
power and hard-wire communications with a standard Cresnet system, and recharges
the Crestron High Performance Rechargeable Power Pack (ST-BTPN) that is supplied
with the touchpanel. Refer to the latest revisions of the BB-1700CW Wall Mount
Back Box Installation Guide (Doc. 6105) and the DA-1700CW Docking Assembly
Operations and Installation Guide (Doc. 6104).
NOTE: The DA-1700CW and BB-1700CW are also available separately. Contact
Crestron customer support for more information.
Functional Summary
•
5.7" (14.48 cm) active color matrix display
•
320 x 240 screen resolution
•
63MIPs ColdFire processor running Crestron Isys
•
16-bit non-palette graphics
•
64,000-color Crestron Isys engine
•
4 MB of Flash (approx. 3MB For user display lists)
•
8 MB of Synchronous Dynamic RAM (SDRAM)
•
Long-Life NiMH battery
−
Fast charging
−
No battery memory
•
Compatible with existing STRFGWX RF gateway
•
Roaming capability with additional RF gateways
NOTE: The STX-1700CW is supplied with an optional bezel, two 5-button switch
actuators, and ten black pushbuttons (blank), five for each side of the LCD screen.
You can use these buttons to access any frequently used commands. Refer to
Wall Mount 2-Way RF Compact Color Touchpanel: STX-1700CW • 1
®
remote control
®
system). The back box holds the docking
®
generation firmware