Uploading A Vt Pro-E Project - Crestron Isys TPS-4000 Operation Manual

10.4 Inch Tilt Touchpanel
The TPS-4000 touchpanel
source file has the extension
.vtp. A compiled VT Pro-e file
has the extension .vtz.
32 • 10.4 Inch Tilt Touchpanel: Crestron Isys
"Send Program" Window
4. To verify that the program has been transferred successfully, select
Diagnostics | Report Program Information or press F7. This should
display a window that provides details about the current program loaded
into the control system.

Uploading a VT Pro-e Project

The VT Pro-e file can be uploaded to the touchpanel using VT Pro-e or via the
Crestron Viewport.
Upload via VT Pro-e
1. Start VT Pro-e.
2. Select File | Open | Project to view the "Open" window, navigate to the VT
Pro-e file (.vtp), and click Open.
3. Select File | Upload Project. This automatically selects the compiled .vtz
file.
Upload via Crestron Viewport
1. Verify that the procedure for "Communication Settings" that begins on page
28 has been performed.
2. As shown after this step, select File Transfer | Send Touchpanel
(alternatively, press Alt+T) from the Viewport menu.
®
TPS-4000
®
Crestron Isys TPS-4000
Operations Guide - DOC. 6268